LYCOPRO BABY WAX HEATER
LYCON offers a Waxing System to create the perfect experience! All of our waxing products using in conjunction with each other allow therapists to create a painless, hair free and long lasting wax for their clients every time.
LYCON heaters are designed to make professional waxing fuss free and easy!
LYCON quality wax heaters ensure waxes are kept at a well-balanced continuous temperature and perform well all day long!
Our LYCOPRO Baby Wax Heater, perfect for small work stations, mobile salons or make up artists. This no fuss 225G wax heater is convenient, compact and ideal for facial waxing including brows, lip and nose. Suitable for both hot and strip wax with removable insert included.
DESIGN FEATURES:
- 225g insert capacity
- Adjustable thermostat controls
- Indicator light
- Compact for travel convenience
- Maximum temperature 70°C (158°F)
- Extra metal inserts are available
DIRECTIONS OF USE:
- Remove lid and fill the metal insert(s) with the hot or strip wax of your choice. DO NOT put wax directly into the heating chamber, only in the removable inserts.
- Plug into power point and turn regulator dial clockwise to switch heater on.
- To speed up hot wax heating, first turn the dial to 5 for at least 30 minutes, depending on how much wax is in the insert. When relatively melted, reduce heat and allow wax to cool to working temperature. For strip wax, heat on 5 for about 15 minutes, then reduce heat slightly to maintain working temperature.
NOTE 1: As all wax melting points vary, it is best to determine the optimal temperature setting for the wax you are using. For hot wax, the working temperature is around 3 – 4 on the dial. For strip wax, the working temperature is around 5 on the dial. The actual wax temperature is a few degrees lower, due to using an insert.
NOTE 2: LYCON Strip Wax jars can be melted in a microwave then poured into a removable insert for use, which can be reheated and added to as required.
- To increase temperature, move regulator dial clockwise.
- To reduce temperature, move regulator dial anti-clockwise.
- When wax and insert are hot, remove insert from heater carefully with a protective cloth.
WARNING:
- DO NOT immerse heater in water.
- DO NOT use heater near water.
- DO NOT allow water to splash onto heater.
- DO NOT clean heater with water.
- DO NOT overfill heater. Fill up to around 2cm from top of insert.
- DO NOT move heater when it has hot melted wax inside.
IMPORTANT TIP!
How we recommend cleaning and caring for your wax pots:
- While the heater and wax are warm, use paper towel to remove the excess wax from the areas you require.
- Using your post wax oil place some on a clean piece of paper towel and wipe over all the areas of the wax heater to further remove any of the wax residue and stickiness.
- Using a wash cloth with some dishwashing detergent and water clean over the wax pot as this will remove the oily residue and your wax pot will be clean.
Avoid using a Citrus based cleaner on your wax pot.
These cleaners absorb into the plastic, making it brittle and susceptible to fine cracks appearing.