Cartridge Heater - White

For strip wax cartridges

This hand held unit holds and heats 100ml strip wax cartridges quickly and thoroughly allowing for faster treatment times and excellent results. Featuring a digital temperature indicator for easy temperature monitoring during treatments. 

DESIGN FEATURE

• 100ml capacity (strip wax cartridges)
• Digital adjustable temperature indicator
• Stable base cartridge station
• Easy to remove and place back in base
• Protective cover
• Easy temperature control buttons
• Easy to clean surfaces

1. Insert a 100ml roller strip wax cartridge into the cartridge holder.
2. Place the hand held cartridge holder into base to heat wax.
3. Plug into the mains power and turn the temperature dial to the highest temperature setting, which is 104°C.
4. Allow cartridge to heat completely, takes about 15 minutes, depends on the ambient temperature of the cartridge and how much wax is in it.
5. It is important for the therapist to test the wax on themself before applying on client’s skin
6. To reduce the temperature, turn the dial down to 95°C.

• DO NOT immerse heater in water.
• DO NOT use heater near water.
• DO NOT allow water to splash onto heater.
• DO NOT clean heater with water.
• DO NOT overfill heater. Fill up to around 2cm from top of insert.
• DO NOT move heater when it has hot melted wax inside.
• DO NOT switch the cartridge heater on without a cartridge in it. It is easier and safer to remove a cartridge from the cartridge heater, when the heater is warm. Do not leave the cartridge heater switched on when it is empty, or with any empty cartridge for any length of time.

IMPORTANT TIP!

How we recommend cleaning and caring for your wax pots:

1. While the heater and wax are warm, use paper towel to remove the excess wax from the areas you require.
2. Using your post wax oil place some on a clean piece of paper towel and wipe over all the areas of the wax heater to further remove any of the wax residue and stickiness.
3. Using a wash cloth with some dishwashing detergent and water clean over the wax pot as this will remove the oily residue and your wax pot will be clean.

Avoid using a Citrus based cleaner on your wax pot. 

These cleaners absorb into the plastic, making it brittle and susceptible to fine cracks appearing.